RS- 2 is a rapid setting, anionic water-based emulsified asphalt. It is supplied in bulk.
- Boiling Point (F): 212°F
- Specific Gravity (H20=1): 1.01
- Percent Volatile: 0
- Solubility In Water: Soluble
- Appearance And Odor: Brown Liquid, Faint Petroleum Odor
- Flammability: Non-flammable.
In water-based state Recommended Use RS-2 emulsified asphalt is designed for use as a bituminous binder for chip seals. It should be applied with well-cal-ibrated distributors. The distributor nozzles and spray bar should be sized and set to deliver the desired shot rate. The shot rate of BTC RS 2 should be determined by a laboratory chip seal design with the project aggregate and the conditions of the existing pavement. The air and pavement temperatures should be sufficiently high to allow the emulsion to fully cure. Seal coats and surface treatment should be placed when the air temperature is above 50°F and rising.
Available in : Bulk , HDPE Drum(200 kg)